k8s-Prometheus-Alertmanager[邮箱]报警

root

233
文章

0
评论

2021年8月25日00:22:01 评论 21331字阅读71分6秒

k8s-Prometheus-Alertmanager[邮箱]报警

配置alertmanager-发送报警到qq邮箱

报警：指prometheus将监测到的异常事件发送给alertmanager
通知：alertmanager将报警信息发送到邮件、微信、钉钉等

邮箱设置发告警的方法参考：https://blog.csdn.net/weixin_31869579/article/details/119265091

1.#创建alertmanager配置文件

[root@master01 alertmanager]# cat alertmanager-cm.yaml 
kind: ConfigMap
apiVersion: v1
metadata:
  name: alertmanager
  namespace: monitor-sa
data:
  alertmanager.yml: |-
    global: 
      resolve_timeout: 1m
      smtp_smarthost: 'smtp.189.cn:465'
      smtp_from: '13319886377@189.cn'
      smtp_auth_username: '13319886377'
      smtp_auth_password: '你的密码/授权码'
      smtp_require_tls: false
    route:              #用于配置告警分发策略
      group_by: [alertname]          # 采用哪个标签来作为分组依据
      group_wait: 10s                     # 组告警等待时间。也就是告警产生后等待10s，如果有同组告警一起发出
      group_interval: 10s               # 上下两组发送告警的间隔时间
      repeat_interval: 10m             # 重复发送告警的时间，减少相同邮件的发送频率，默认是1h
      receiver: default-receiver      #定义谁来收告警
    receivers:
    - name: 'default-receiver'
      email_configs:
      - to: '30772818@qq.com'
        send_resolved: true

alertmanager配置文件解释说明：

#189邮箱的SMTP服务器地址+端口

smtp_smarthost: 'smtp.189.cn:465'

#这是指定从哪个邮箱发送报警

smtp_from: '13319886377@189.cn'

#这是发送邮箱的认证用户，不是邮箱名

smtp_auth_username: '13319886377'

#这是发送邮箱的授权码而不是登录密码，你们需要用自己的，不要用我的，用我的你会发不出来报警

smtp_auth_password: ' BGWHYUOSOOHWEUJM'

#to后面指定发送到哪个邮箱，我发送到我的qq邮箱，需要写自己的邮箱地址，不应该跟smtp_from的邮箱名字重复

email_configs:

- to: '30772818@qq.com'

报警处理流程如下：

1. Prometheus Server监控目标主机上暴露的http接口（这里假设接口A），通过Promethes配置的'scrape_interval'定义的时间间隔，定期采集目标主机上监控数据。
2. 当接口A不可用的时候，Server端会持续的尝试从接口中取数据，直到"scrape_timeout"时间后停止尝试。这时候把接口的状态变为“DOWN”。
3. Prometheus同时根据配置的"evaluation_interval"的时间间隔，定期（默认1min）的对Alert Rule进行评估；当到达评估周期的时候，发现接口A为DOWN，即UP=0为真，激活Alert，进入“PENDING”状态，并记录当前active的时间；
4. 当下一个alert rule的评估周期到来的时候，发现UP=0继续为真，然后判断警报Active的时间是否已经超出rule里的‘for’ 持续时间，如果未超出，则进入下一个评估周期；如果时间超出，则alert的状态变为“FIRING”；同时调用Alertmanager接口，发送相关报警数据。
5. AlertManager收到报警数据后，会将警报信息进行分组，然后根据alertmanager配置的“group_wait”时间先进行等待。等wait时间过后再发送报警信息。
6. 属于同一个Alert Group的警报，在等待的过程中可能进入新的alert，如果之前的报警已经成功发出，那么间隔“group_interval”的时间间隔后再重新发送报警信息。比如配置的是邮件报警，那么同属一个group的报警信息会汇总在一个邮件里进行发送。
7. 如果Alert Group里的警报一直没发生变化并且已经成功发送，等待‘repeat_interval’时间间隔之后再重复发送相同的报警邮件；如果之前的警报没有成功发送，则相当于触发第6条条件，则需要等待group_interval时间间隔后重复发送。

同时最后至于警报信息具体发给谁，满足什么样的条件下指定警报接收人，设置不同报警发送频率，这里有alertmanager的route路由规则进行配置。

2.#创建prometheus和告警规则配置文件

[root@master01 alertmanager]# cat prometheus-alertmanager-cfg.yaml 
kind: ConfigMap
apiVersion: v1
metadata:
  labels:
    app: prometheus
  name: prometheus-config
  namespace: monitor-sa
data:
  prometheus.yml: |
    rule_files:
    - /etc/prometheus/rules.yml
    alerting:
      alertmanagers:
      - static_configs:
        - targets: ["localhost:9093"]
    global:
      scrape_interval: 15s
      scrape_timeout: 10s
      evaluation_interval: 1m
    scrape_configs:
    - job_name: 'kubernetes-node'
      kubernetes_sd_configs:
      - role: node
      relabel_configs:
      - source_labels: [__address__]
        regex: '(.*):10250'
        replacement: ':9100'
        target_label: __address__
        action: replace
      - action: labelmap
        regex: __meta_kubernetes_node_label_(.+)
    - job_name: 'kubernetes-node-cadvisor'
      kubernetes_sd_configs:
      - role:  node
      scheme: https
      tls_config:
        ca_file: /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
      bearer_token_file: /var/run/secrets/kubernetes.io/serviceaccount/token
      relabel_configs:
      - action: labelmap
        regex: __meta_kubernetes_node_label_(.+)
      - target_label: __address__
        replacement: kubernetes.default.svc:443
      - source_labels: [__meta_kubernetes_node_name]
        regex: (.+)
        target_label: __metrics_path__
        replacement: /api/v1/nodes//proxy/metrics/cadvisor
    - job_name: 'kubernetes-apiserver'
      kubernetes_sd_configs:
      - role: endpoints
      scheme: https
      tls_config:
        ca_file: /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
      bearer_token_file: /var/run/secrets/kubernetes.io/serviceaccount/token
      relabel_configs:
      - source_labels: [__meta_kubernetes_namespace, __meta_kubernetes_service_name, __meta_kubernetes_endpoint_port_name]
        action: keep
        regex: default;kubernetes;https
    - job_name: 'kubernetes-service-endpoints'
      kubernetes_sd_configs:
      - role: endpoints
      relabel_configs:
      - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scrape]
        action: keep
        regex: true
      - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scheme]
        action: replace
        target_label: __scheme__
        regex: (https?)
      - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_path]
        action: replace
        target_label: __metrics_path__
        regex: (.+)
      - source_labels: [__address__, __meta_kubernetes_service_annotation_prometheus_io_port]
        action: replace
        target_label: __address__
        regex: ([^:]+)(?::\d+)?;(\d+)
        replacement: $1:$2
      - action: labelmap
        regex: __meta_kubernetes_service_label_(.+)
      - source_labels: [__meta_kubernetes_namespace]
        action: replace
        target_label: kubernetes_namespace
      - source_labels: [__meta_kubernetes_service_name]
        action: replace
        target_label: kubernetes_name 
    - job_name: 'kubernetes-pods'
      kubernetes_sd_configs:
      - role: pod
      relabel_configs:
      - action: keep
        regex: true
        source_labels:
        - __meta_kubernetes_pod_annotation_prometheus_io_scrape
      - action: replace
        regex: (.+)
        source_labels:
        - __meta_kubernetes_pod_annotation_prometheus_io_path
        target_label: __metrics_path__
      - action: replace
        regex: ([^:]+)(?::\d+)?;(\d+)
        replacement: $1:$2
        source_labels:
        - __address__
        - __meta_kubernetes_pod_annotation_prometheus_io_port
        target_label: __address__
      - action: labelmap
        regex: __meta_kubernetes_pod_label_(.+)
      - action: replace
        source_labels:
        - __meta_kubernetes_namespace
        target_label: kubernetes_namespace
      - action: replace
        source_labels:
        - __meta_kubernetes_pod_name
        target_label: kubernetes_pod_name
    - job_name: 'kubernetes-schedule'
      scrape_interval: 5s
      static_configs:
      - targets: ['192.168.1.180:10251','192.168.1.181:10251','192.168.1.182:10251']   #scheduler组件所在节点的ip  
    - job_name: 'kubernetes-controller-manager'
      scrape_interval: 5s
      static_configs:
      - targets: ['192.168.1.180:10252','192.168.1.181:10252','192.168.1.182:10252']  
    - job_name: 'kubernetes-kube-proxy'
      scrape_interval: 5s
      static_configs:
#kube-proxy组件所在节点的ip
      - targets: ['192.168.1.180:10249','192.168.1.181:10249','192.168.1.182:10249','192.168.1.183:10249']
    - job_name: 'kubernetes-etcd'
      scheme: https
      tls_config:
        ca_file: /var/run/secrets/kubernetes.io/k8s-certs/etcd/ca.crt
        cert_file: /var/run/secrets/kubernetes.io/k8s-certs/etcd/server.crt
        key_file: /var/run/secrets/kubernetes.io/k8s-certs/etcd/server.key
      scrape_interval: 5s
      static_configs:
                                        #etcd组件所在节点的ip
         - targets: ['192.168.1.180:2379','192.168.1.181:2379','192.168.1.182:2379']  
  rules.yml: |
    groups:
    - name: example
      rules:
      - alert: kube-proxy的cpu使用率大于80%
        expr: rate(process_cpu_seconds_total{job=~"kubernetes-kube-proxy"}[1m]) * 100 > 80
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}组件的cpu使用率超过80%"
      - alert:  kube-proxy的cpu使用率大于90%
        expr: rate(process_cpu_seconds_total{job=~"kubernetes-kube-proxy"}[1m]) * 100 > 90
        for: 2s
        labels:
          severity: critical
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}组件的cpu使用率超过90%"
      - alert: scheduler的cpu使用率大于80%
        expr: rate(process_cpu_seconds_total{job=~"kubernetes-schedule"}[1m]) * 100 > 80
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}组件的cpu使用率超过80%"
      - alert:  scheduler的cpu使用率大于90%
        expr: rate(process_cpu_seconds_total{job=~"kubernetes-schedule"}[1m]) * 100 > 90
        for: 2s
        labels:
          severity: critical
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}组件的cpu使用率超过90%"
      - alert: controller-manager的cpu使用率大于80%
        expr: rate(process_cpu_seconds_total{job=~"kubernetes-controller-manager"}[1m]) * 100 > 80
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}组件的cpu使用率超过80%"
      - alert:  controller-manager的cpu使用率大于90%
        expr: rate(process_cpu_seconds_total{job=~"kubernetes-controller-manager"}[1m]) * 100 > 0
        for: 2s
        labels:
          severity: critical
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}组件的cpu使用率超过90%"
      - alert: apiserver的cpu使用率大于80%
        expr: rate(process_cpu_seconds_total{job=~"kubernetes-apiserver"}[1m]) * 100 > 80
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}组件的cpu使用率超过80%"
      - alert:  apiserver的cpu使用率大于90%
        expr: rate(process_cpu_seconds_total{job=~"kubernetes-apiserver"}[1m]) * 100 > 90
        for: 2s
        labels:
          severity: critical
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}组件的cpu使用率超过90%"
      - alert: etcd的cpu使用率大于80%
        expr: rate(process_cpu_seconds_total{job=~"kubernetes-etcd"}[1m]) * 100 > 80
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}组件的cpu使用率超过80%"
      - alert:  etcd的cpu使用率大于90%
        expr: rate(process_cpu_seconds_total{job=~"kubernetes-etcd"}[1m]) * 100 > 90
        for: 2s
        labels:
          severity: critical
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}组件的cpu使用率超过90%"
      - alert: kube-state-metrics的cpu使用率大于80%
        expr: rate(process_cpu_seconds_total{k8s_app=~"kube-state-metrics"}[1m]) * 100 > 80
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "{{$labels.instance}}的{{$labels.k8s_app}}组件的cpu使用率超过80%"
          value: "{{ $value }}%"
          threshold: "80%"      
      - alert: kube-state-metrics的cpu使用率大于90%
        expr: rate(process_cpu_seconds_total{k8s_app=~"kube-state-metrics"}[1m]) * 100 > 0
        for: 2s
        labels:
          severity: critical
        annotations:
          description: "{{$labels.instance}}的{{$labels.k8s_app}}组件的cpu使用率超过90%"
          value: "{{ $value }}%"
          threshold: "90%"      
      - alert: coredns的cpu使用率大于80%
        expr: rate(process_cpu_seconds_total{k8s_app=~"kube-dns"}[1m]) * 100 > 80
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "{{$labels.instance}}的{{$labels.k8s_app}}组件的cpu使用率超过80%"
          value: "{{ $value }}%"
          threshold: "80%"      
      - alert: coredns的cpu使用率大于90%
        expr: rate(process_cpu_seconds_total{k8s_app=~"kube-dns"}[1m]) * 100 > 90
        for: 2s
        labels:
          severity: critical
        annotations:
          description: "{{$labels.instance}}的{{$labels.k8s_app}}组件的cpu使用率超过90%"
          value: "{{ $value }}%"
          threshold: "90%"      
      - alert: kube-proxy打开句柄数>600
        expr: process_open_fds{job=~"kubernetes-kube-proxy"}  > 600
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}打开句柄数>600"
          value: "{{ $value }}"
      - alert: kube-proxy打开句柄数>1000
        expr: process_open_fds{job=~"kubernetes-kube-proxy"}  > 1000
        for: 2s
        labels:
          severity: critical
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}打开句柄数>1000"
          value: "{{ $value }}"
      - alert: kubernetes-schedule打开句柄数>600
        expr: process_open_fds{job=~"kubernetes-schedule"}  > 600
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}打开句柄数>600"
          value: "{{ $value }}"
      - alert: kubernetes-schedule打开句柄数>1000
        expr: process_open_fds{job=~"kubernetes-schedule"}  > 1000
        for: 2s
        labels:
          severity: critical
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}打开句柄数>1000"
          value: "{{ $value }}"
      - alert: kubernetes-controller-manager打开句柄数>600
        expr: process_open_fds{job=~"kubernetes-controller-manager"}  > 600
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}打开句柄数>600"
          value: "{{ $value }}"
      - alert: kubernetes-controller-manager打开句柄数>1000
        expr: process_open_fds{job=~"kubernetes-controller-manager"}  > 1000
        for: 2s
        labels:
          severity: critical
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}打开句柄数>1000"
          value: "{{ $value }}"
      - alert: kubernetes-apiserver打开句柄数>600
        expr: process_open_fds{job=~"kubernetes-apiserver"}  > 600
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}打开句柄数>600"
          value: "{{ $value }}"
      - alert: kubernetes-apiserver打开句柄数>1000
        expr: process_open_fds{job=~"kubernetes-apiserver"}  > 1000
        for: 2s
        labels:
          severity: critical
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}打开句柄数>1000"
          value: "{{ $value }}"
      - alert: kubernetes-etcd打开句柄数>600
        expr: process_open_fds{job=~"kubernetes-etcd"}  > 600
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}打开句柄数>600"
          value: "{{ $value }}"
      - alert: kubernetes-etcd打开句柄数>1000
        expr: process_open_fds{job=~"kubernetes-etcd"}  > 1000
        for: 2s
        labels:
          severity: critical
        annotations:
          description: "{{$labels.instance}}的{{$labels.job}}打开句柄数>1000"
          value: "{{ $value }}"
      - alert: coredns
        expr: process_open_fds{k8s_app=~"kube-dns"}  > 600
        for: 2s
        labels:
          severity: warnning 
        annotations:
          description: "插件{{$labels.k8s_app}}({{$labels.instance}}): 打开句柄数超过600"
          value: "{{ $value }}"
      - alert: coredns
        expr: process_open_fds{k8s_app=~"kube-dns"}  > 1000
        for: 2s
        labels:
          severity: critical
        annotations:
          description: "插件{{$labels.k8s_app}}({{$labels.instance}}): 打开句柄数超过1000"
          value: "{{ $value }}"
      - alert: kube-proxy
        expr: process_virtual_memory_bytes{job=~"kubernetes-kube-proxy"}  > 2000000000
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "组件{{$labels.job}}({{$labels.instance}}): 使用虚拟内存超过2G"
          value: "{{ $value }}"
      - alert: scheduler
        expr: process_virtual_memory_bytes{job=~"kubernetes-schedule"}  > 2000000000
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "组件{{$labels.job}}({{$labels.instance}}): 使用虚拟内存超过2G"
          value: "{{ $value }}"
      - alert: kubernetes-controller-manager
        expr: process_virtual_memory_bytes{job=~"kubernetes-controller-manager"}  > 2000000000
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "组件{{$labels.job}}({{$labels.instance}}): 使用虚拟内存超过2G"
          value: "{{ $value }}"
      - alert: kubernetes-apiserver
        expr: process_virtual_memory_bytes{job=~"kubernetes-apiserver"}  > 2000000000
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "组件{{$labels.job}}({{$labels.instance}}): 使用虚拟内存超过2G"
          value: "{{ $value }}"
      - alert: kubernetes-etcd
        expr: process_virtual_memory_bytes{job=~"kubernetes-etcd"}  > 2000000000
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "组件{{$labels.job}}({{$labels.instance}}): 使用虚拟内存超过2G"
          value: "{{ $value }}"
      - alert: kube-dns
        expr: process_virtual_memory_bytes{k8s_app=~"kube-dns"}  > 2000000000
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "插件{{$labels.k8s_app}}({{$labels.instance}}): 使用虚拟内存超过2G"
          value: "{{ $value }}"
      - alert: HttpRequestsAvg
        expr: sum(rate(rest_client_requests_total{job=~"kubernetes-kube-proxy|kubernetes-kubelet|kubernetes-schedule|kubernetes-control-manager|kubernetes-apiservers"}[1m]))  > 1000
        for: 2s
        labels:
          team: admin
        annotations:
          description: "组件{{$labels.job}}({{$labels.instance}}): TPS超过1000"
          value: "{{ $value }}"
          threshold: "1000"   
      - alert: Pod_restarts
        expr: kube_pod_container_status_restarts_total{namespace=~"kube-system|default|monitor-sa"} > 0
        for: 2s
        labels:
          severity: warnning
        annotations:
          description: "在{{$labels.namespace}}名称空间下发现{{$labels.pod}}这个pod下的容器{{$labels.container}}被重启,这个监控指标是由{{$labels.instance}}采集的"
          value: "{{ $value }}"
          threshold: "0"
      - alert: Pod_waiting
        expr: kube_pod_container_status_waiting_reason{namespace=~"kube-system|default"} == 1
        for: 2s
        labels:
          team: admin
        annotations:
          description: "空间{{$labels.namespace}}({{$labels.instance}}): 发现{{$labels.pod}}下的{{$labels.container}}启动异常等待中"
          value: "{{ $value }}"
          threshold: "1"   
      - alert: Pod_terminated
        expr: kube_pod_container_status_terminated_reason{namespace=~"kube-system|default|monitor-sa"} == 1
        for: 2s
        labels:
          team: admin
        annotations:
          description: "空间{{$labels.namespace}}({{$labels.instance}}): 发现{{$labels.pod}}下的{{$labels.container}}被删除"
          value: "{{ $value }}"
          threshold: "1"
      - alert: Etcd_leader
        expr: etcd_server_has_leader{job="kubernetes-etcd"} == 0
        for: 2s
        labels:
          team: admin
        annotations:
          description: "组件{{$labels.job}}({{$labels.instance}}): 当前没有leader"
          value: "{{ $value }}"
          threshold: "0"
      - alert: Etcd_leader_changes
        expr: rate(etcd_server_leader_changes_seen_total{job="kubernetes-etcd"}[1m]) > 0
        for: 2s
        labels:
          team: admin
        annotations:
          description: "组件{{$labels.job}}({{$labels.instance}}): 当前leader已发生改变"
          value: "{{ $value }}"
          threshold: "0"
      - alert: Etcd_failed
        expr: rate(etcd_server_proposals_failed_total{job="kubernetes-etcd"}[1m]) > 0
        for: 2s
        labels:
          team: admin
        annotations:
          description: "组件{{$labels.job}}({{$labels.instance}}): 服务失败"
          value: "{{ $value }}"
          threshold: "0"
      - alert: Etcd_db_total_size
        expr: etcd_debugging_mvcc_db_total_size_in_bytes{job="kubernetes-etcd"} > 10000000000
        for: 2s
        labels:
          team: admin
        annotations:
          description: "组件{{$labels.job}}({{$labels.instance}})：db空间超过10G"
          value: "{{ $value }}"
          threshold: "10G"
      - alert: Endpoint_ready
        expr: kube_endpoint_address_not_ready{namespace=~"kube-system|default"} == 1
        for: 2s
        labels:
          team: admin
        annotations:
          description: "空间{{$labels.namespace}}({{$labels.instance}}): 发现{{$labels.endpoint}}不可用"
          value: "{{ $value }}"
          threshold: "1"
    - name: 物理节点状态-监控告警
      rules:
      - alert: 物理节点cpu使用率
        expr: 100-avg(irate(node_cpu_seconds_total{mode="idle"}[5m])) by(instance)*100 > 90
        for: 2s
        labels:
          severity: ccritical
        annotations:
          summary: "{{ $labels.instance }}cpu使用率过高"
          description: "{{ $labels.instance }}的cpu使用率超过90%,当前使用率[{{ $value }}],需要排查处理" 
      - alert: 物理节点内存使用率
        expr: (node_memory_MemTotal_bytes - (node_memory_MemFree_bytes + node_memory_Buffers_bytes + node_memory_Cached_bytes)) / node_memory_MemTotal_bytes * 100 > 90
        for: 2s
        labels:
          severity: critical
        annotations:
          summary: "{{ $labels.instance }}内存使用率过高"
          description: "{{ $labels.instance }}的内存使用率超过90%,当前使用率[{{ $value }}],需要排查处理"
      - alert: InstanceDown
        expr: up == 0
        for: 2s
        labels:
          severity: critical
        annotations:   
          summary: "{{ $labels.instance }}: 服务器宕机"
          description: "{{ $labels.instance }}: 服务器延时超过2分钟"
      - alert: 物理节点磁盘的IO性能
        expr: 100-(avg(irate(node_disk_io_time_seconds_total[1m])) by(instance)* 100) < 60
        for: 2s
        labels:
          severity: critical
        annotations:
          summary: "{{$labels.mountpoint}} 流入磁盘IO使用率过高！"
          description: "{{$labels.mountpoint }} 流入磁盘IO大于60%(目前使用:{{$value}})"
      - alert: 入网流量带宽
        expr: ((sum(rate (node_network_receive_bytes_total{device!~'tap.*|veth.*|br.*|docker.*|virbr*|lo*'}[5m])) by (instance)) / 100) > 102400
        for: 2s
        labels:
          severity: critical
        annotations:
          summary: "{{$labels.mountpoint}} 流入网络带宽过高！"
          description: "{{$labels.mountpoint }}流入网络带宽持续5分钟高于100M. RX带宽使用率{{$value}}"
      - alert: 出网流量带宽
        expr: ((sum(rate (node_network_transmit_bytes_total{device!~'tap.*|veth.*|br.*|docker.*|virbr*|lo*'}[5m])) by (instance)) / 100) > 102400
        for: 2s
        labels:
          severity: critical
        annotations:
          summary: "{{$labels.mountpoint}} 流出网络带宽过高！"
          description: "{{$labels.mountpoint }}流出网络带宽持续5分钟高于100M. RX带宽使用率{{$value}}"
      - alert: TCP会话
        expr: node_netstat_Tcp_CurrEstab > 1000
        for: 2s
        labels:
          severity: critical
        annotations:
          summary: "{{$labels.mountpoint}} TCP_ESTABLISHED过高！"
          description: "{{$labels.mountpoint }} TCP_ESTABLISHED大于1000%(目前使用:{{$value}}%)"
      - alert: 磁盘容量
        expr: 100-(node_filesystem_free_bytes{fstype=~"ext4|xfs"}/node_filesystem_size_bytes {fstype=~"ext4|xfs"}*100) > 80
        for: 2s
        labels:
          severity: critical
        annotations:
          summary: "{{$labels.mountpoint}} 磁盘分区使用率过高！"
          description: "{{$labels.mountpoint }} 磁盘分区使用大于80%(目前使用:{{$value}}%)"

[root@master01 alertmanager]# kubectl apply -f prometheus-alertmanager-cfg.yaml 
configmap/prometheus-config configured

3.生成一个etcd-certs，这个在部署prometheus需要

[root@master01 alertmanager]# kubectl -n monitor-sa create secret generic etcd-certs --from-file=/etc/kubernetes/pki/etcd/server.key  --from-file=/etc/kubernetes/pki/etcd/server.crt --from-file=/etc/kubernetes/pki/etcd/ca.crt
secret/etcd-certs created

4.通过kubectl apply更新资源清单yaml文件

[root@master01 prometheus]#  kubectl delete -f prometheus-deploy.yaml
deployment.apps "prometheus-server" deleted
[root@master01 prometheus]# cd alertmanager/
[root@master01 alertmanager]# kubectl apply -f prometheus-alertmanager-deploy.yaml
deployment.apps/prometheus-server created

#查看prometheus是否部署成功

[root@master01 alertmanager]# kubectl get pod -n monitor-sa 
NAME                                 READY   STATUS    RESTARTS   AGE
kube-state-metrics-d5c6498b9-mm4x7   1/1     Running   0          11h
node-exporter-4dj69                  1/1     Running   0          12h
node-exporter-gc5ln                  1/1     Running   0          12h
node-exporter-nq8rl                  1/1     Running   0          12h
prometheus-server-6568c8d67-wh8fb    2/2     Running   0          5s

5.通过kubectl apply更新yaml文件

[root@master01 alertmanager]# kubectl apply -f alertmanager-svc.yaml

alertmanager-svc.yaml文件内容如下:

[root@master01 alertmanager]# cat alertmanager-svc.yaml 
---
apiVersion: v1
kind: Service
metadata:
  labels:
    name: prometheus
    kubernetes.io/cluster-service: 'true'
  name: alertmanager
  namespace: monitor-sa
spec:
  ports:
  - name: alertmanager
    nodePort: 30066
    port: 9093
    protocol: TCP
    targetPort: 9093
  selector:
    app: prometheus
  sessionAffinity: None
  type: NodePort

6.解决端口不暴露问题

从上面可以发现kubernetes-controller-manager和kubernetes-schedule都显示连接不上对应的端口

可按如下方法处理：

kube-scheduler：

vim /etc/kubernetes/manifests/kube-scheduler.yaml

修改如下内容：

把--bind-address=127.0.0.1变成--bind-address=192.168.1.180

把httpGet:字段下的hosts由127.0.0.1变成192.168.1.180

把—port=0删除

[root@master01 alertmanager]# vim /etc/kubernetes/manifests/kube-scheduler.yaml

[root@master02 ~]# vi /etc/kubernetes/manifests/kube-scheduler.yaml

[root@master03 ~]# vi /etc/kubernetes/manifests/kube-scheduler.yaml

#注意：192.168.1180是k8s的控制节点master01的ip

kubernetes-controller-manager:

把--bind-address=127.0.0.1变成--bind-address=192.168.1.180

把httpGet:字段下的hosts由127.0.0.1变成192.168.40.180

把—port=0删除

[root@master01 alertmanager]# vim /etc/kubernetes/manifests/kube-controller-manager.yaml

[root@master02 ~]# vi /etc/kubernetes/manifests/kube-controller-manager.yaml

修改之后在k8s各个节点执行

systemctl restart kubelet

[root@master01 alertmanager]# systemctl restart kubelet

[root@master02 alertmanager]# systemctl restart kubelet

[root@master01/02 alertmanager]# kubectl get cs
Warning: v1 ComponentStatus is deprecated in v1.19+
NAME                 STATUS    MESSAGE             ERROR
controller-manager   Healthy   ok                  
scheduler            Healthy   ok                  
etcd-0               Healthy   {"health":"true"}

可以看到相应的端口被监听

[root@master01 alertmanager]# ss -antulp | grep :10251
tcp    LISTEN     0      4096     :::10251                :::*                   users:(("kube-scheduler",pid=42425,fd=7))
[root@master01 alertmanager]# ss -antulp | grep :10252
tcp    LISTEN     0      4096     :::10252                :::*                   users:(("kube-controller",pid=51997,fd=7))

kube-proxy端口10249访问不到

是因为kube-proxy默认端口10249是监听在127.0.0.1上的，需要改成监听到物理节点上，按如下方法修改，线上建议在安装k8s的时候就做修改，这样风险小一些：

//一个master上执行就行了
[root@master01 alertmanager]# kubectl edit configmap kube-proxy -n kube-system

把metricsBindAddress这段修改成metricsBindAddress: 0.0.0.0:10249

    metricsBindAddress: "0.0.0.0:10249"

然后重新启动kube-proxy这个pod

[root@master01 alertmanager]# kubectl get pods -n kube-system | grep kube-proxy |awk '{print $1}' | xargs kubectl delete pods -n kube-system
pod "kube-proxy-56cmd" deleted
pod "kube-proxy-6wvwq" deleted
pod "kube-proxy-8tj6s" deleted
pod "kube-proxy-z7ff4" deleted

[root@master01 alertmanager]# ss  -antulp |grep :10249
tcp    LISTEN     0      4096     :::10249                :::*                   users:(("kube-proxy",pid=107577,fd=13))
[root@master02 ~]# ss  -antulp |grep :10249
tcp    LISTEN     0      4096     :::10249                :::*                   users:(("kube-proxy",pid=104402,fd=15))
[root@node01 ~]# ss  -antulp |grep :10249
tcp    LISTEN     0      4096     :::10249                :::*                   users:(("kube-proxy",pid=24390,fd=14))

点击Alerts，可看到如下

FIRING表示prometheus已经将告警发给alertmanager，在Alertmanager 中可以看到有一个 alert。

登录到alertmanager web界面

邮箱里显示的报警信息

扩展：暴力更新配置文件

修改prometheus任何一个配置文件之后，可通过kubectl apply使配置生效，执行顺序如下：

kubectl delete -f alertmanager-cm.yaml
kubectl apply -f alertmanager-cm.yaml
kubectl delete -f prometheus-alertmanager-cfg.yaml
kubectl apply  -f prometheus-alertmanager-cfg.yaml 
kubectl delete -f  prometheus-alertmanager-deploy.yaml
kubectl apply  -f prometheus-alertmanager-deploy.yaml

继续阅读

我的微信

这是我的微信扫一扫

jeesns项目代码部署and自动上线

k8s-Prometheus-Alertmanager[邮箱]报警

k8s-Prometheus-Alertmanager[邮箱]报警

配置alertmanager-发送报警到qq邮箱

1.#创建alertmanager配置文件

报警处理流程如下：

2.#创建prometheus和告警规则配置文件

3.生成一个etcd-certs，这个在部署prometheus需要

4.通过kubectl apply更新资源清单yaml文件

5.通过kubectl apply更新yaml文件

6.解决端口不暴露问题

扩展：暴力更新配置文件

发表评论取消回复

微信

联系方式

k8s-Prometheus-Alertmanager[邮箱]报警

配置alertmanager-发送报警到qq邮箱

1.#创建alertmanager配置文件

报警处理流程如下：

2.#创建prometheus和告警规则配置文件

3.生成一个etcd-certs，这个在部署prometheus需要

4.通过kubectl apply更新资源清单yaml文件

5.通过kubectl apply更新yaml文件

6.解决端口不暴露问题

扩展：暴力更新配置文件

您可以选择一种方式赞助本站

微信钱包扫描赞助

发表评论 取消回复

登录 注册 找回密码

微信

联系方式

发表评论取消回复

登录注册找回密码